How To String A Weed Eater
Having a weed whacker is a fantastic idea for your yard work tools. It is useful when it comes to getting rid of the overgrown grass and bush in your area. This helps to keep your yard tidy and presentable. Most people have never had a weed eater of their own. They will most probably call someone to trim the overgrown bushes on their behalf. Stringing is quite challenging, and mainly if you have never used a weed whacker before.
You need to learn the steps on how to put the string on the whacker to make it easier for you. Since a weed whacker is one of the most popular brands of trimmers available, it is quite easy to find them in the market. You won’t have to struggle when buying the weed whacker. Before you start the process, you need to know the things you are going to need. This includes the weedeater string, wire cutters, and scissors. Ensure you have all this before you start the process. Below is a guide on how to put a string on a weed eater.
Read The Manual
This may sound cliché, but it is one of the essential hacks, especially if you are using a new weed whacker. You may assume you know what to do just because you have used a weed whacker before, and then you find yourself spending a lot of hours trying to put everything together.
Since there are new models available, you will find that with some, you are just required to buy a new spool. Understanding different kinds of models available through reading the manuals will prove helpful. The user manual will also direct you on where you will find the specific type of string for your model. Note that the sizes of the strings also vary, and hence it is not advisable to use a different size or type of string. Make the manual your friend, and you won’t go wrong.
Remove The Spool
First, you need to release the spool. To do this, turn to unscrew the spool. You may also choose to push the tabs in to release the spool.
You will also find that in some models, you will need to remove the head of the trimmer away from the rest of the body before being able to release the spool. To do this, one is advised to remove the nuts that usually hold it in place and screw them later on, after the task is completed.
Cut The String
After removing the spool, you are then supposed to cut the string. Cut a swath, preferably between fifteen and twenty-five feet, depending on the size that you need. If you are not sure about the size, note that you can always cut a longer piece and modify it later. However, if your machine uses two strings at the same time, it is essential to ensure that both strings are of the same size for an even cut.
Restringing
The next step involves restringing. Find the small hole that is usually located in the center of the spool. Continue to push through about a half-inch of the string. Ensure the string is held onto the hole to enable you to load the rest of the spool. Note that if you have two lines, there will be two holes. You should handle one hole at a time.
Wind The String And Replace
After doing all of the above, you need to wind the string. There will be an arrow directing you on which way you are supposed to wind. Ensure you wind it from side to side. If and when you need to form a second layer, start overlapping. This will prevent your string from tangling. After you finish winding, clip the string into the notch, which is usually found at the edge of the spool. Proceed to replace the spool Into the hub and pull the ends using the machine’s eyelets. From here, you should now be able to turn the machine and trim those weeds in your yard.
Stringing your weed eater shouldn’t be complicated. As long as you have the right equipment and it comes with a manual, you will be in a better position to fix the string on your own. Use the guide above to help you string your weed eater well.